The Fender VINTAGE REISSUE 65 TWIN REVERB is an authentic reproduction of the original! It features all-tube circuitry to deliver a fat, warm tone.

The Fender VINTAGE REISSUE 65 TWIN REVERB amp has seen action in every imaginable musical venue, and continues its musical legacy today. Whether you play rock, jazz, country, or whatever, this is what a clean electric guitar sounds like! One of the cleanest tube amps ever, or crank it hard for slight crunch. Delivers 85W through two twelve inch Jensen drivers. This Fender amp has two channels, tube vibrato, tube spring reverb, tilt-back legs, and Black textured vinyl with silver grille cloth. Two-button footswitch for Reverb and Vibrato on/off included. The Fender 65 Twin Reverb Amp really is a reproduction of a legend.

The main features of the Fender VINTAGE REISSUE 65 TWIN REVERB include:

The VINTAGE REISSUE 65 TWIN REVERB amp is one of the cleanest tube amps ever
Vintage Reissue Series Tube Amp
85 watts into 4 ohms output
2-12 inch Jensen® C-12K, 8 ohm Speakers with Ceramic Magnets
Dual Channels (Normal and Vibrato)
Features Reverb, Vibrato, 2-Button Footswitch, Tilt Back Legs, Baltic Birch Plywood Cabinet
Controls include Normal Channel: Bright Switch, Volume, Treble, Middle, Bass. Vibrato Channel: Bright Switch, Volume, Treble, Middle, Bass. Reverb Vibrato: Speed, Intensity
64 lbs. (29.03 kg)
Height: 19.87 inches (50.46 cm), Width: 26.5 inches (67.31 cm), Depth: 10.5 inches (26.67 cm)
Fender 2-Button Footswitch for Reverb and Vibrato On/Off included with this Amplifier

Output: 30 watts into 8 ohms
Ohms: 8 ohms
Speakers: 1-10″ Fender® Special Design Speaker with High Frequency Tweeter
Channels: 1 Channel
Features:
Amazing onboard artist presets and loops that let you play along with the world’s greatest musicians
MP3 and Wav file storage & playback
30-watt Guitar amp with 10″ Special Design® speaker with High Frequency Tweeter
100 factory and user presets with digital amp modeling & DSP effects
USB connection for user programming and audio recording output
USB cable included
SD card slot for unlimited storage of presets and audio content
Onboard phrase sampler with overdub and export functions
Onboard chromatic tuner
Stereo line outputs for performance and recording
Covering: Black Textured Vinyl with Silver Grille Cloth
Weight: 27.3 lbs. (12.4 kg)
Dimensions:
Height: 16.25″ (41 cm),
Width: 16.75″ (42.7 cm),
Depth: 8.25″ (21 cm)

The world’s most popular tube amps just got better! Fender® Hot Rod series amplifiers are found on every stage in the world, large and small, and are used by guitarists from all walks of life. Hot Rod amps deliver unmistakable Fender tone and are the perfect platform for musicians to craft their own signature sound. These no-frills amps are affordable, reliable and loud, and they pair extremely well with stomp boxes. The Hot Rod Deluxe III is a 40-watt single 12” combo—the standard for gigging guitarists worldwide. Famous for the low-end headroom characteristic of 6L6 tubes and a versatile all-12AX7 tube preamp, it also boasts luscious Fender spring reverb, an effects loop and more. Players wanting to add a little more output, fullness and stage coverage can even add a matching 112 extension enclosure (P/N 223-1010-000). Additional Hot Rod Deluxe III upgrades include an easier-to-read black control panel with front-reading text, new badge, streamlined footswitch, graduated volume and treble pot tapers, “tighter” overdrive and a Celestion® G12P-80 speaker.

Fender Hot Rod Deluxe III Features:
Wattage: 40 Watts
Effects Loop: Effects Loop (Preamp Out, Power Amp In)
Inputs: Two
Extension Speaker Jack: Extension Speaker Jack
Channels: Three Selectable Channels (Normal, Drive and More Drive)
Rectifier: Solid State Rectifier
Controls: Presence, Reverb, Master Volume, Middle, Bass, Treble, Drive Select Switch, Drive Volume, Bright Switch
Hardware Finish: Chrome
Pilot Light Jewel: Red Amp Jewel
Handle: “Dog Bone” Handle
Front Panel: Black Front Panel
Grill Cover Cloth: Black Textured Vinyl Covering with Blackface Style Black/Silver Grille Cloth
Input Impedance: 1M (Input 1)/136K (Input 2)
Output Impedance: 4 or 8 ohms
Amplifier Length: 10.75″ (27.3 cm)
Amplifier Width: 23.5″ (59.7 cm)
Amplifier Height: 18.75″ (47.6 cm)
Amplifier Weight: 45 lbs (20.41 kg)
Effects: Spring Reverb
Speaker: 1-12″ Celestion® G12P-80, 8 ohm Speaker
Pre Amp Tubes: 3 x 12AX7
Power Tubes: 2 x 6L6
Unique Features:Independent Gain and Master Controls in Drive Channel
Bright Switch
Effects Loop
Reverb
External Speaker Jack
2-Button 3-Function Footswitch for Channel Select, Drive Select and “More Drive” Select
Black Panel
Vintage Pointer Knobs
Internal Variable Bias Control

FootSwitch: 2-Button, 3-Function Footswitch Included
Knobs: Chicken head-style amp knobs
Accessories: Includes Amplifier Cover and 2-Button Footswitch
Cover: Amplifier Cover Included

Mustang II is a 40-watt closed-back combo with a 12” Special Design speaker that sounds great and pumps serious volume. It contains 24 highly accurate on-board amp presets with tones from vintage Fender sparkle to outrageous modern metal distortion, and a bank of 24 built-in effects including chorus, flanging, phasing, tremolo, vibratone, step filter, reverb, echo, octaver and more — 12 modulation effects and 12 delay and reverb effects in all. It’s great for practice and jam sessions, and an 1/8” headphone jack lets you play loud, even if only for yourself. Further, connect Mustang II to your computer with free Fender FUSE software. Open up a world of possibilities, including on-screen parameter control, deep editing, additional effects, unlimited preset storage, online preset swapping with the Fender FUSE community, and free Fender artist presets. An optional single-button footswitch controls two quick-access presets.

Mustang II packs it all into a striking visual design with sleek and modern Fender styling that provides a look that’s as desirable as the sound.

Fender Mustang II Amp Features
Wattage: 40 Watts
Inputs: one
Auxiliary Input: 1/8” Stereo Input Jack
Headphone Jack: 1/8″ Headphone Jack
Line Out: Speaker Emulated USB Output; 1/8” Headphone Jack Doubles as Speaker Emulated Line Out
Channels: One Channel (with 24 presets)
Power Handling: 40 Watts
Controls: Gain, Volume, Treble, Bass, Master, Preset Select, Modulation Select, Delay/Reverb Select, Save Button, Exit Button, Tap Tempo Button
Front Panel: Black Front Panel
Grill Cover Cloth: Carbon Tweed Textured Vinyl with Silver Grille Cloth
Output Impedance: 8 ohms
Amplifier Length: 8.7″ (22 cm)
Amplifier Width: 18.25 in (46.4 cm)
Amplifier Height: 17.25 in (43.8cm)
Amplifier Weight: 24 lbs (10.9 kg)
Speaker: 1-12″ Fender® Special Design Speaker
Additional Comments:24 effects in two categories, easily and instantly selected and adjusted with a twist of only two knobs.
12 modulation effects (chorus, deep chorus, flanger, bias/sine tremolo, optical/vintage tremolo, optical vintage tremolo fast, vibratone slow, vibratone fast, octaver, phaser slow deep, phaser medium, step filter)
12 delay and reverb effects (tape delay 150ms/1 repeat, stereo tape delay 300ms/3 repeats, mono delay 700ms/4 repeats, small room reverb, plate reverb, large hall reverb, Fender ’63 spring reverb, Fender ’65 spring reverb, tape delay room, tape delay large hall, ducking delay small hall, echo filter)

Unique Features:Amp modeling
Distortion
24 onboard presets (unlimited storage with computer)
USB connectivity for user programming and audio recording output
Auxiliary input for media player
Chromatic tuner; Fender® FUSE™ application for deep editing, preset storage, patch swapping and free artist content
Additional effects including fuzz, pitch shifter and touch wah, with even more available through Fender FUSE
Ableton® Live Lite 8 Fender Edition studio-quality recording software compatible with Mustang USB recording output
AmpliTube® Fender LE software

FootSwitch: Optional 1-Button Footswitch for Toggling 2 Quick Access Presets (P/N 099-4049-000)

The Fender Super Sonic 22, Blond, All-Valve 22Watt Guitar Amp is a professional tube amplifier for guitarists who crave glorious Fender clean and overdriven tones and expressive modern high-gain distortion—all in one no-nonsense amp.

The Super-Sonic 22 delivers this versatility with the organic feel and moderate output power of the legendary Deluxe Reverb® amp, perfect for most stage and studio applications.

The VINTAGE channel delivers pure, unmistakable Fender tone, and the awesome BURN channel ignites musical inspiration with overdrive flavors ranging from bluesy to flamethrower. And while the Super-Sonic 22 is capable of heavily saturated tube distortion and sustain, it never masks the tonal character of your guitar. Offered in classic Black/Silver or iconic 1961 Blonde/Oxblood cosmetic treatment; both versions include ivory “radio” knobs and flowing 1960s script logo.

The Fender Super Sonic 22, Blond, All-Valve 22Watt Guitar Amp Main Features Include:

22 Watts RMS Output at 8Ohms
Channels: Two: Vintage & Burn (Vintage Channel has Two Switchable Voices)
Controls: Vintage Channel: Volume, Treble, Bass, Voicing Switch (Normal/Fat). Burn Channel: Gain 1, Gain 2, Treble, Bass, Middle, Volume, Master Reverb
Auxiliary Input: 1/4″ Footswitch Jack.
Effects: Fender long-spring Reverb by Accutronics®
PreAmp Tubes: 3 x 12AX7, 2 x 12AT7
Output Impedance: 8 Ohms
Speaker: 12 inch 50 Watt Fender “Lightning Bolt” speaker by Eminence®
Cabinet Material: 3/4″ Birch/Maple Plywood Cabinet
Handle: “Dog Bone” Handle
Knobs: Ivory Radio Knobs
VINTAGE channel contains pre-gain tone controls and two switchable voices
BURN channel contains dual gain controls and post-gain EQ, allowing tonal experimentation
Made in the UK.
Dimensions (HxW): 17.3″ (440 mm) x 8.5″ (216 mm)
Weight: 40 lbs (18.2 kg)
Accessories: Amp Cover and 4-Button Footswitch Included

A 5-Watt Class “A” Tube guitar amplifier with one 6V6 power tube, one 12AX7 preamp tube, an 8 inch Special Design speaker, 16-position VOICE knob with a myriad of clean and distorted preamp voices, 16 DSP effects, and genuine Fender Blackface cosmetics.

Fender Vibro Champ XD Features:
5 Watt Tube “Class A” Power Amp.
“Voice” Control with 16 Different Amp Voicings Delivering Various Clean and Overdriven Tones for any Style of Music: Blues, Rock, Country, Jazz, Metal, and More.
16 DSP Effects (Vibratone Slow; Vibratone Fast; Delay 130ms; Delay 300ms; Delay 450ms; Large Room Reverb; Concert Hall Reverb; Classic Fender Spring Reverb; Reverb+Delay; Fast Chorus; Deep Chorus; Chorus+Delay; Chorus+Reverb; Tremolo Low Speed; Tremolo Medium Speed; Tremolo High Speed).
External Speaker Output Allows use with External Speaker Cabinet Line Output.
Strap Handle.
Red Jeweled Pilot Light.

The Laney VC15-110 Guitar Valve Amplifier Combo, 15 Watts, 1 X 10 inch Speaker. 15 watts of amazingly warm or classic bluesy lead tone.

The Laney VC15-110 is the only amp on the market to employ ‘The Dark Art’. The VC15-110 is the latest baby of the VC range. Built on the distinguished heritage of the VC30, the VC15 delivers great tone. 15 watts of amazingly warm or classic bluesy lead tone powered by matched EL84′s and cranked out through its internal 10 inch speaker. For even more dynamics, there are two dedicated extension cabinets – the GS112VE and the GS210VE.

The main features of the Laney VC15-110 include:
•15 watts of amazingly warm or classic bluesy lead tone
•Power: RMS 15 Watts
•Inputs: 2 x Jack (Bright & Normal)
•Channels 2: Clean and Drive
•Equalisation: Bass, Mid & Treble
•Bright Switch: Yes
•Preamp Valves: 3 x 12AX7 TAD Tubes
•Output Valves: 2 x EL84 TAD Tubes
•Class: A/B
•Reverb: Yes
•Footswitch: FS2 (Not included)
•Speaker connections: 1 x External Speaker Socket (cuts out internal speaker)
•FX Loop(s): Yes
•Drivers: 1 x 10 inch Custom Jensen Driver
•Weight: 14 Kg
•Dimensions (mm): 447 x 348 x 200
•Channel Controls: Tone control

Laney VC15-110 Guitar Amp Combo (code 31308)
Guitar Valve Amplifier Combo, 15 Watts, 1X10″ Speaker

Inspired by classic British valve amplifiers, the Laney VC30-112 combines vintage tone with Laney build quality and value.

The range of VC30 combos offer classic British class A tone in a variety of speaker options. The VC30 features a single channel with footswitchable gain, with its own level control, three band EQ and a bright switch. If you’re looking for that elusive living tone then look no further than the VC30. The VC30 generates very little cross over distortion because it runs in pure class A mode – its valves are always hot and ready to roll, which gives it that unmistakable class A sound and feel. If you have never experienced that level of connection between a player an amp and a tone then you’ve never tried a VC30. The VC30 is available in a number of different speaker options – the VC30-112 – which houses 1 x 12″ Custom designed 35 watt driver, the VC30-210 which houses a pair of 10″ Custom designed 35 watt drivers and the VC30-212 which is the classic retro option which features a pair of 12″ Custom designed 35 watt drivers. To complement the VC30 range of amplifier there are a range of dedicated extension cabinets in a couple of differing speaker options to give the player the opportunity to mix and match speaker complement to get that ultimate classic tones.

The GS112VE is a 1 x 12″ extension cabinet and the GS210VE is a 2 x 10″ extension cabinet. Mix and match to your tones content.

The main features of the Laney VC30-112 are:
•Power RMS : 30 Watts
•Inputs : Hi & Lo Jacks
•Channels : 2
•Equalisation : Bass, Middle, Treble
•Bright Switch : Yes: On Clean Channel
•Preamp Valves : Premium ECC83
•Output Valves : Premium EL84
•Class : Class A
•Reverb : Yes
•Footswitch : FS2 (Not included)
•Speaker connections : Jack
•FX Loop(s) : Yes
•Impedance : Minimum 4 ohms
•Drivers : 1 x 12″ Celestion 70 Eighty
•Weight : 22.2 Kg
•Dimensions (mm) : 559 x 250 x 420

Inspired by classic British valve amplifiers, the Laney VC30-210 combines vintage tone with Laney build quality and value .

The range of VC30 combos offer classic British class A tone in a variety of speaker options. The VC30 features a single channel with footswitchable gain, with its own level control, three band EQ and a bright switch. If you’re looking for that elusive living tone then look no further than the VC30. The VC30 generates very little cross over distortion because it runs in pure class A mode – its valves are always hot and ready to roll, which gives it that unmistakable class A sound and feel. If you’ve never experienced that level of connection between a player, an amp and a tone then you’ve never tried a VC30. The VC30 is available in a number of different speaker options – the VC30-112 – which houses 1 x 12″ Custom designed 35 watt driver, the VC30-210 which houses a pair of 10″ Custom designed 35 watt drivers and the VC30-212 which is the classic retro option which features a pair of 12″ Custom designed 35 watt drivers. To complement the VC30 range of amplifier there are a range of dedicated extension cabinets in a couple of differing speaker options to give the player the opportunity to mix and match speaker complement to get that ultimate classic tones.

The GS112VE is a 1 x 12″ extension cabinet and the GS210VE is a 2 x 10″ extension cabinet. Mix and match to your tones content.

The main features of the Laney VC30-210 are:
•Power RMS : 30 Watts
•Inputs : Hi & Lo Jacks
•Channels : 2
•Equalisation : Bass, Middle, Treble
•Bright Switch : Yes: On Clean Channel
•Preamp Valves : Premium ECC83
•Output Valves : Premium EL84
•Class : Class A
•Reverb : Yes
•Footswitch : FS2 (Not included)
•Speaker connections : Jack
•FX Loop(s) : Yes
•Impedance : Minimum 4 ohms
•Drivers : 2x 10″ Jensen C10Q16
•Weight : 20 Kg
•Dimensions (mm) : 559 x 250 x 420

Laney VC30-210 Guitar Amp Combo (code 35598)
30W Tube Guitar Combo, Single Channel, Spring Reverb, Celestion Speakers

The Line 6 SPIDER JAM Guitar Entertainment System, 75 Watts, Real Backing Tracks, Effects, Amp Simulation. Innovative, multi-purpose guitar/vocal combo with real audio backing tracks.

The Line 6 SPIDER JAM is the ideal tool for any level of artist who wants to perfect their jammin’ skills. It is loaded with over 100 Endless Jams using real audio tracks from real-life LA session players, making the experience like playing alongside a pro band, not just cheesy midi files. A built-in multi-track Looping Recorder stores up to 14 minutes of sound, and the Mic/aux inputs adds the extra bonus of throwing keyboards, bass or vocals into the mix. Spider Jam, like other amps in the Spider III family, features hundreds of rock star-approved presets, 12 distinct amp models, Smart Control effects, along with a built-in tuner. Packed with Insane rock star sounds, the Line 6 Spider Jam is the perfect combination of practice tool and gigging amp.

The main features of the Line 6 SPIDER JAM include:

* Innovative, multi-purpose guitar/vocal combo with real audio backing tracks
* An ideal practice tool
* 250 artist-created tones
* 100 + Endless Jams with a pro rhythm section
* Looping recorder stores up 14 minutes of music
* 12 distinct amp and cabinet models
* 7 Smart Control FX models including: Tape Echo, Multi-Tap, Sweep Echo, Flanger/Chorus, Phaser, Tremolo and Reverb
* 36 Programmable presets
* 75-watt power section
* 12 inch Custom Celestion speaker and a 2 inch tweeter
* On-board tuner
* CD/MP3 Input jack
* Stereo 1/4 inch jack outputs and a headphone jack

The format and versatility of the 40W Haze combo makes it the perfect partner for guitarists looking for a gig worthy, compact workhorse with enough features, power and tone capabilities that it can cope in a wide variety of situations.

With its EL34 power stage and ECC83 powered preamp this portable 40W combo has been designed to deliver to the guitarist’s expectations through the power and feel of its valves.

Laid out in a top loaded format the 40W Haze sports two distinctive footswitchable channels. In normal mode the tone circuitry of the Haze 40W provides low gain sounds that are crisp and honest, providing a really usable clean tone.

The boost switch in normal mode pushes the lower shapes of your tone by adding more gain and extra punch in the lower midsection of your tone for a fuller sound, perfect for fattening up thinner sounding single coil pickups.

The bright switch provides added sparkle lifting the higher aspects of the guitar’s sound and adding a crisper edge and more defined brighter feel.
The overdrive channel of the Haze 40w delivers a classic overdriven tone option. With a separate gain control it is possible to dial in preamp drive that distorts the sound and makes it easy to access that more aggressive rock and blues attitude without losing the definition of your guitar.

* 40w all tube combo
* Loaded with reverb and effects
* ECC83 valve preamp stage
* EL34 valve power stage
* 2 way footswitch included

The Marshall JMD50 is a 50watt guitar amplifier head which is a combination of revolutionary digital pre amplification and the awesome power of a Marshall EL34 power stage.
The JMD-50 delivers a variety of amplifier topologies in full high definition using exclusive technology developed in conjunction with SOFTUBE, a leading digital development company.
The JMD-501 is loaded with 16 possible preamplifier variants, onboard modulation, noise gate, delay and reverb sections and has the ability to silently record through an emulated output, play through headphones or along with your Mp3 player.
Not only can the JMD-501 perform on a stage but because of all of these features it also excels in a studio or home recording environment as well. A 6-way footswitch is included with the ability to store 28 presets amongst other features.
The Main Features of the Marshall JMD501 Include:

. 50Watt Valve Amp with 2X EL34 Power Stage
. 16 Digital Natural Harmonic Technology Preamplifier Topologies
. 1X 12″ Speaker
. Comprehensive Effects including- Chorus, Phaser, Flanger, Tremolo ,Noise Gate and Independent Custom-voiced Reverb
. Tap Tempo controlled HiFi Analogue, Tape and Multi delays
. Effects Loop
. Midi Control (in and thru)
. Stomp ware Controller Supplied
. Line out with Speaker Emulation
. Headphone Out
. Preamp Out
Speaker Out

The Marshall JVM205C Guitar Tube Amplifier Combo features two EL34 power amp valves for an array of tones.

The Marshall JVM205C Amplifier Combo also features two channels, Clean/Crunch and Overdrive.

The Marshall JVM205C Guitar Tube Amplifier Combo main features include:
•50 Watt Output (RMS)
•4 X ECC83 Pre-Amp Valves
•1 X ECC83, 2 X EL34 Power Amp Valves
•PEDL-00045 Footswitch
•Dimensions: 690 x 510 x 265
•Weight: 29.5kg

Marshall JVM205C Guitar Tube Amplifier Combo (code 61159)
Guitar Amp Combo, 50 Watts, All Valve, 2×12, 1 Vintage Speaker & 1 Heritage Speaker, 2 Channels, JVM Series.

The Marshall MA100 Guitar Valve Amplifier Head is valve powered and delivers that unmistakeable Marshall tone. The MA100 is the perfect stepping stone between every guitarist’s first Marshall and one of our iconic UK built tone monsters.

Click Below for MNJ’s Marshall MA100 Guitar Valve Amplifier Head Review on DV Guitar Mag:
•Marshall MA100 Guitar Valve Amp Head

Marshall MA100 Guitar Valve Amplifier Head Overview:

The Marshall MA100 Head is able to deliver the benefits of all-valve tone and colour. The MA100H is the perfect choice for everyone’s first all-valve amplifier head and also the perfect choice for people who want to take their sound on tour. The MA100 offers a valve amp from Marshall that is more accessible than ever before.

Two orange LED’s illuminate the interior of the unit, highlighting the power valves. This effect is visible through the fret cloth where the trusty white script logo is mounted onto a solid piece of transparent Perspex.

The Marshal MA 100H is powered using the traditional Marshall mainstays of ECC83 double triode valves in the preamp, and EL34 pentode valves in the power amp. The layout and controls are kept simple, allowing you to explore unhindered the full potential of the all-valve tone within. The amplifier benefits from separate equalisation stages for both the Clean channel and Overdrive channel allowing you to optimally adjust each one without compromising the other.

An extra benefit has been provided in the form of a valve driven ‘Boost’ function on the OD channel giving you, for example, a solo boost with more volume and gain. The amp also contains a spring reverb for use with all channels within the amp.

The Marshall MA100H is equipped with an onboard spring reverb tank which allows you to add an extra dimension to your sound. The reverb chosen perfectly compliments the valve tone of the amplifier and using the front panel reverb level control you can dial in how much you need for your own taste.

The Marshall MA100 Guitar Valve Amplifier Head Main Features Include:
•Power Output: 100W
•Preamp Valves: 3 x ECC83
•Poweramp Valves: 4 x EL34
•Channels: 2
•Clean Channel controls: Volume, Treble, Middle, Bass
•Overdrive Channel controls: Volume, Treble, Middle, Bass, Gain, Crunch, Balance
•Master controls: Presence, Resonance, Reverb
•Overdrive Channel Boost
•Footswitch ‘Channel Select’ / ‘Boost’
•Serial FX Loop: (-10dBV nominal level)
•Speaker output options: 16Ohms and 8Ohms

Marshall MA100H Guitar Valve Amplifier Head (code 67732)
Guitar Valve Amplifier Head, 100 Watts, All Valve, 2 Channels, Includes Footswitch

The Marshall MG50FX Guitar Amp Combo produces the type of tone other amplifiers can only try to imitate. By developing reliable high quality solid-state analogue circuitry and combining it with the flexibility of digital control the Marshall MG50FX provides access to a vast range of quality tonal options.

The Marshall MG50FX Guitar Amp Combo possess unrivalled tone and also benefits from features such as a custom selected 12” speaker to ensure the highest quality sound.

The Marhsall MG50FX Combo features a custom voiced effects in an effects system. Onboard reverb allows just the right amount of depth to be added to your tone. Delay is also controlled by its own independent control and not only can you add in as much or as little delay as you require, the onboard tap tempo function allows you to dictate exactly how fast the delay runs. The third effects control provides a three option chorus / phaser / flanger section allowing one of these custom voiced effects to be added into your sound

The Marshall MG15FX Combo Main Features Include:
•Combo Amp
•50 Watt RMS Output
•4-Channels
•DSP Effects
•12″ Speaker
•3 stage EQ: Independent Bass, Middle and Treble controls
•2 distinctive Marshall tone sets: Clean,Crunch / Overdrive
•Contour control
•Store your preferred setting by pressing the ‘Store’ button
•Individual headphone output
•Line input sockets for MP3 / CD
•3.5mm headphone socket

Marshall MG50FX Guitar Amp Combo (code 61565)
Guitar Amplifier Combo, 50 Watts, 12″ Speaker, 4-Channels, DSP Effects, MG Series 4 .

tuner and 16 built-in digital effects including reverb, delay, chorus, flanger and vibrato presets. The Orange Crush PiX 20LDX guitar combo also boasts a headphone jack, reverb, low, mid, high, master, distortion gain, distortion / clean switch, volume.
The Orange Crush PiX range are the ultimate combo practice amps, perfect for rehearsal or smaller gigs. The Orange Crush PiX combos combine portability with solid Orange construction and durability. For Orange to put their name on a tranistor amp, it must be good.
Power: 20-watts RMS @10% THD 8 ohm.
Speaker: 1 GR10R 8-inch.
Input: 1.
Channel Configuration: Clean and Overdrive.
Speaker: 8-inch Orange Design.
Cabinet: Sturdy Particleboard.
Clean Channel Controls: Volume.
Dirty Channel Controls: Overdrive Level and Master.
Aux input for MP3 / CD player.
16 Digital effects programs including reverb, delay, chorus, flanger and vibrato presets.
EQ: Low, Mid, High.
Headphone Jack Out for 8 ohm impedance headphone.
Reverb: Spring type Belton BS2EBE1A.
Dimensions: 14.3 x 12.1 x 8 inch.
Weight: 17.6 lbs