nPreowned and in full working order, Amp head with cover and in excellent condition!

2x12 Cab in Very good condition with signs of Gigging.

Marshall Origin ORI212 2X12 Guitar Cab:

Marshall have done a great job nailing that classic 60s British tone with their Origin series, but one piece has been missing until now... cabs! The Marshall Origin series has now expanded to included 2x12 and 4x12 cabs in both straight and angled configurations for you to create your own Marshall stack. Marshall stacks helped shaped the sound of rock 'n roll from the 60s onward thanks to the volume Marshall cabs were capable of producing.

These cabs feature that iconic early Marshall styling for a vintage aesthetic and are installed with Celestion speakers to perfectly suit the tones that the Origin series is capable of producing. Whether you just want a half-stack or you're going all out with a 4x12 full stack, the Origin series cabs will help you get that classic look and sound.

• Speaker Configuration: 2 x 12"
• Speaker Model: Celestion Seventy-80 (80w, 16Ω)
• Power Handling: 160W
• Unit Impedance: 8Ω
• Width: 745mm / 29.5"
• Depth: 320mm / 12.5"
• Height: 545mm / 21.4"
• Weight: 23.6kg / 52.0lbs
• Castors added

Marshall ORI20H Origin 20 Head:

Gain boosts galore

Classic Marshall crunch. Dial in as much filthy distortion as you like through responsive Gain control. From a light smattering of breakup right on through to a fully clipped, savage signal, the Origin 20W boasts plenty of attitude. Still not enough? It gets better! With the included footswitch you can add a Gain boost to make those solos shine and thicken chords with extra bite. Activate the boost, and you'll blast through a mix to make yourself heard. You can also add more high end shine using the unique Tilt control - tone tweaking perfection.

Tube is king

Totally unique. It's hard to beat the sound of a valve amp. And that's certainly the case with the Marshall ORI20H with its authentic, pure, and warm tones. Riffs played through this all-tube amp will sound powerful, organic, and superbly dynamic, with that unmistakable tube responsiveness. With two EL34 power valves and three ECC83 preamp valves, you'll get a rich, resounding, rockin' tube tone which is guaranteed to put a smile on your face.

Plus it boasts 20W of tube power, more than enough for gigs and larger venues. But for those times you don't need to call upon the mighty 20W volume, the Powerstem power attenuation can bring this down to a much gentler 3W, or even 0.5W for those studio or bedroom settings. Totally flexible to your needs, the Marshall ORI20W is here to rock the right way.

Specs

General

• Model: Origin20H
• Range: Origin
• Technology: Valve
• Channels: 1
• Accessories: PEDL-90016 Footswitch

Electronics

• Output Wattage: 20W
• Controls: Gain, Boost, Tilt, Bass, Middle, Treble, Master, Presence, Power Scaling
• Outputs: 3 x 1/4'' Jack Sockets (16-Ohm Load / 8 Ohms Load), DI Out
• Inputs: 1 x 1/4'' Jack Instrument Input, Footswitch
• Effects Loop: Send/Return

Valves

• Preamp Valves: 3 x ECC83
• Power Amp Valves: 2 x EL34

Dimensions

• Width: 520mm
• Height: 225mm
• Depth: 225mm
• Weight: 9.4kg